200,000 BTU Waste Oil Boiler

200,000 BTU Waste Oil Boiler

In-floor radiant heat * Car and truck washes * Paint booths * Ice prevention and melt * Heating * Make-up air * Evaporation * Potable hot water * Supplement to HVAC systems

BTU Input

200,000 BTU/58.3 kW per hour

Fuel Flow Rate

1.4 gallons/hour (5.3 liters/hour)

Water Output Temp. (max)

230 F /110 C

Operating Pressure

Low pressure, 30 psi

200,000 BTU Waste Oil Boiler
  • ¼” Carbon Steel Shell
  • Easily Integrated Domestic Hot Water Coil
  • Flame Retention Head
  • Hour Meter
  • Integrated Air Compressor
  • Non-Condensing
  • Patented Accutemp Preheater
  • Removable Rear Cleanout Panel
  • Small Footprint, fit into more existing structures than any other brand
  • Specialized Spin-On waste oil filter
  • Stackable
  • Steadyflo Metering Fuel Pump
  • Swing Open Boiler Door
  • Wet Floor Based Heat Exchanger

BTU Input

200,000 BTU per hour  

58.3 kW per hour

Fuel Flow Rate

1.4 gallons/hour

5.3 liters/hour

Water Output Temp. (max)

230 F

110 C

Domestic Hot Water Output

4.0 gallons per minute at 100 F temp rise  

15 liters per minute at 37.8 C temp rise  

Boiler Capacity 

30 gallons

114 liter

Inlet Water Temp

140 F minimum

60 C minimum

Exhaust Flue Diameter

8" diameter available

20.32cm diameter available

System Dimensions

45"H x 32"W x 50"D

114 cm H x 82 cm W x 127 cm D

Shipping Weight 

790 lbs.

358.34 kg

Operating Pressure

Low Pressure 30 psi

 

Commonly Used Fuels

Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel 

Electrical Req.

115 VAC 60Hz, 25 amps maximum dedicated circuit

Regulation and Certification

EPA-approved

UL-listed system

ASME-certified vessel

Canadian Registration (CRN)

Warranty

10 years on heat exchanger, five years full and five years prorated

Three years on parts