200,000 BTU Furnace, 130-Gallon Used Oil Storage Tank and Class A Flue Kit

This complete system heats up to 5,000 square feet, approximately four to eight service bays, and comes with our smaller used oil storage tank.

 200,000 BTU (58.3 kW) per hour

1.4 gallons/hour (5.3 liters/hour)

 100-120º F (37.8-48.9º C)

Only EnergyLogic Systems Include These Features - Standard

Air Compressor – Integrated so you don’t have to use shop air
Low Fuel Cutoff Switch: Guarantees your furnace won’t run on empty
Maximum Installation Flexibility: Tank-mount, Wall-mount, Ceiling-hung
Patented Metering Pump – Precision fuel delivery
Stainless Steel Heat Exchanger – Long lasting and corrosion resistant
Industry’s Longest Warranty: Three years on parts and 10 years on heat exchanger

Accutemp Pre-heater
Adjustable Louver
Air Compressor, Integrated
Class A Flue Kit – (2) 3’ sections stainless steel double wall pipe, Roof Flashing Kit, Storm Collar
Digital Thermostat
Easy Access Cleaning Cap
Flame Retention Head
Hour Meter
Installation: Tank-mount, Wall-mount, Ceiling-hung
Low Fuel Cutoff Switch
Manometer
Patented Metering Pump
Quick Connect Copper Fuel Lines
Specialized Spin-On Waste Oil Filter
Stainless Steel Barometric Damper
Stainless Steel Heat Exchanger
Squirrel Cage Blower
Support Brackets
Swing-Away Burner
Tank – Low fuel cut-off switch, Fuel Gauge, Oil Pump Mounting Bracket
Drain Port, with valve

BTU Input	200,000 BTU/hour	58.3 kW/hour
Fuel Flow Rate	1.4 gallons/hour	5.3 liters/hour
Heat Rise Over Input Air	100-120 F	37.8-48.9 C
Air Flow	1500 cfm	42 cu. m/min
Warm Air Outlet Dimensions, can be ducted from both sides	15"W x 15"H	38cm W x 38cm H
Exhaust Flue Diameter	6” or 8" diameter available	15cm or 20cm diameter available
Furnace Dimensions	18"H x 18"W x 103"L	46cm H x 46cm W x 262cm L
Used Oil Storage Tank, Single Wall, Workbench	130 gallon	492.10 liters, workbench
Tank Dimensions	Single Wall: 32"H x 30"W x 38"L	Single Wall: 81cm H x 76cm W x 96cm L
Shipping Weight	720 lbs.	327 kg
Approved Fuels	Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel
Electrical Req.	115 VAC 60Hz, 25 amps maximum dedicated circuit
Regulation and Certification	EPA-approved UL-listed system – U.S. and Canada
Warranty	10 years on heat exchanger, five years full and five years prorated Three years on parts